Flexible, flame retardant military standard heat shrink tubing
- BrandDEEM
- TypeDM-T135
Applications
Perfect for numerous electronic, automotive and consumer goods. Suitable for electrical insulation,
protection of components, strain relief, Cable bounding, identification.
Features
Specially designed formula approved by UL. Flexible and flame retardant. Free from toxic heavy metal
and harmful substances such as PBB's, PBBO's, PBBE's. Offering low Shrinking temperature.
Various
Operating temperature : -55°C to +135°C
Minimum shrink temperature: 80°C
Minimum fully recovery temperature: 100°C
Approvals: UL 224 125°C VW-1 600 V
Cadmium content < 5 ppm. RoHs compliant
Standard colors: Black, red, blue, yellow, green, white. Other colors available on request.
Shrink ratio: 2:1 (3:1 and 4:1 available.)
Technical Data
Property
Test Method
Typical Data
Operating temperature
UL 224
-55°C to+ 135°℃
Tensile strength
ASTM D 2671
>14 MPa
Elongation at break
ASTM D 2671
400%
Longitudinal shrinkage
UL 224
0±5%
Eccentricity
ASTM D 2671
<30%
Flammability
VW-1
Pass
Dielectric strength
IEC 243
>20 KV/mm
Yolume resistance
IEC 93
1014Ω.cm
Copper stability
UL 224
Pass
Heat aging / Tensile strength / Ultimate elongation
158°℃/168h
Unaged/>12 MPa/>350%
Dimensions/Shrink ratio 2:1
Size
As Supplied(mm)
After Recovery (mm)
Inch. (D)
3/64
1.2
0.18
0.65
0.30
200
1/16
1.6
0.18
0.85
0.33
200
3/32
2.4
0.25
1.2
0.36
200
1/8
3.2
0.25
1.6
0.44
200
3/16
4.8
0.25
2.4
0.55
200
1/4
6.4
0.25
3.2
0.55
200
3/8
9.5
0.30
4.8
0.55
100
1/2
12.7
0.35
6.4
0.65
100
5/8
16
0.35
8
0.69
100
3/4
19.1
0.40
9.5
0.89
100
1
25.4
0.45
12.7
0.90
50
11/4
32
0.45
16
0.90
50
11/2
38.1
0.50
19.1
1.00
50
2
50.8
0.50
25.4
1.00
25
3
76.2
0.55
38.1
1.20
25
4
100
0.55
50.8
1.30
25
5
120
0.55
63
1.40
25
6
150
0.55
75
1.40
25
7
180
0.55
90
1.40
25
Dimensions/Shrink ratio 3:1
| Size | As Supplied(mm) | After Recovery(mm) |
Standard length
m/spool
|
||
|
DM-T135
3X inch. (D)
|
Inside Diameter
Min. (D)
|
Wall Thickness
Nominal.(T)
|
Inside Diameter
Max. (d)
|
Wall Thickness
Nominal.(t)
|
|
| 1/16 | 1.5/0.5 | 0.15 | 0.5 | 0.45 | 200 |
| 1/8 | 3/1 | 0.18 | 1.0 | 0.55 | 200 |
| 3/16 | 4.5/1.5 | 0.20 | 1.5 | 0.60 | 100 |
| 1/4 | 6/2 | 0.22 | 2 | 0.65 | 100 |
| 3/8 | 9/3 | 0.30 | 3 | 0.75 | 50 |
| 1/2 | 12/4 | 0.35 | 4 | 0.80 | 50 |
| 5/8 | 15/5 | 0.35 | 5 | 0.85 | 50 |
| 3/4 | 18/6 | 0.40 | 6 | 0.89 | 50 |
| 1 | 24/8 | 0.45 | 8 | 1.00 | 25 |
| 11/4 | 30/10 | 0.45 | 10 | 1.15 | 25 |
| 11/2 | 39/13 | 0.50 | 13 | 1.25 | 25 |
| 2 | 50/16 | 0.75 | 16 | 2.3 | 1 |
| 21/2 | 60/20 | 0.80 | 20 | 2.4 | 1 |
| 3 | 70/23 | 0.85 | 23 | 2.4 | 1 |
| 4 | 100/33 | 0.85 | 33 | 2.4 | 1 |
Special sizes (up to 7 inches) and other special features available on request
